Schlegel Contact Blocks, Series C & P
The C & P electronic contact blocks have three or six connections and the function of a single-circuit inverter with snap action. The contact blocks have faston terminals 2.8 x 0.8 mm. The contact blocks have a snap-in lock for quick assembly with the actuators. They provide the utmost reliability even at lowest voltages and currents.
Contact blocks shown below are only a small sampling of what is available. Please open the attached PDF for a complete list including detailed specifications as well as the bulbs available for the lighted units in this series.
Contact blocks shown below are only a small sampling of what is available. Please open the attached PDF for a complete list including detailed specifications as well as the bulbs available for the lighted units in this series.
| Description | Part Number | ||
| screw con | pcb con | pcb mount | |
| Momentary | |||
| 1 INVERTER | CT | CZTP | CTP-485 |
| 2 INVERTERS | CT2 | CZTP2 | |
| Momentary with socket (for illumination) | |||
| 1 INVERTER | CTL | CZTLP | CTLP-485 |
| 2 INVERTERS | CTL2 | CZTLP2 | |
| For Emergency Stops (momentary) | |||
| 2 NC | PTPOO | ||
| 1 NC + 1NO | PTFPOI | ||
| Lampholders only | |||
| CL | CZLP | CLP-485 | |
| Sockets | |||
| 8 PIN | CAP8 | ||
| 6 PIN | CAP6 | ||
| 5 PIN | CAP5 | ||
| 3 PIN | CAP3 | ||
| 2 PIN | CAP2 | ||